{"title":"Sensors","description":"","products":[{"product_id":"msd-magnetic-pickup-assembly-8505","title":"MSD Magnetic Pickup Assembly 8505","description":"\u003cp\u003eThis is a replacement pickup for older style crank trigger systems that require a magnetic pickup. This pickup is magnetic and must be used with a trigger wheel equipped with steel studs to create a signal. The pickup is .75\" x 16\" x 2.25\".\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991802699973,"sku":"MSD8505","price":207.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/MSD_Magnetic_Pickup_Assembly_8505.webp?v=1774215958"},{"product_id":"msd-crank-trigger-pickup-non-magnetic-3-4-16-unf-8276","title":"MSD Crank Trigger Pickup - Non-Magnetic - 3\/4\"-16 - UNF 8276","description":"\u003cp\u003eEach Pick-Up is hand wound on a special bobbin and terminated to our tinned conductor, teflon jacketed wiring. These wires are also routed through a strain relief for protection. This assembly is then installed into the precision housing and is potted with a fracture resistant epoxy compound. To ensure that the windings are entirely encased in epoxy, the Pick-Ups undergo a vacuum procedure to remove any air inside the housing.\u003c\/p\u003e\n\n\u003cp\u003eMSD's Non-Magnetic Pick-Ups are engineered for extreme applications. In fact, this Pick-Up was designed and tested on 300+ mph top fuel dragsters! To live up to MSD's demanding expectations in these extreme applications, we took it upon ourselves to design and build the Pick-Ups in-house. This way we can control every aspect of their assembly and quality.\u003c\/p\u003e\n\n\u003cp\u003eAll of these procedures are necessary to produce the strongest, most reliable non-magnetic Pick-Up available.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Replacement Pick-up\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991802831045,"sku":"MSD8276","price":141.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/MSD_Crank_Trigger_Pickup_-_Non-Magnetic_-_UNF_8276.webp?v=1774215958"},{"product_id":"holley-easy-level™-fuel-level-sender-19-250-1","title":"Holley Easy Level™ Fuel Level Sender 19-250-1","description":"\u003cp\u003e\"Best Engineered New Product\" Winner at the 2023 SEMA Show -\u003c\/p\u003e\n\n\u003cp\u003eOur all-new Holley Easy Level(TM) sender uses LiDAR technology to precisely measure the depth of fuel remaining in your tank and works with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. It also works with many other gauge brands. This model is compatible with tanks ranging from 4-to-39-inches. Setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Plus the necessary screws and gasket for installation are included.\u003c\/p\u003e\n\n\u003cp\u003eUpgrade Classic Instruments' or other brands' gauge sets to capture the benefits of LiDAR, \"laser imaging, detection, and ranging\" technology. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser, technology that has been used successfully in other applications for many years. An instruction sheet is included for Classic Instruments and other standard gauges. See additional instruction sheet below for AutoMeter applications.\u003c\/p\u003e\n\n\u003cp\u003eBesides the problems encountered with float setup, hitting baffles or tank wall, this eliminates having to set up the float type sender so saves time and effort.\u003c\/p\u003e\n\n\u003cp\u003eMax operating temperature of 185 degrees\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Improved design with flying leads for easy wiring and prevents accidental contact with surfaces above sending unit\u003cbr\u003e\n-Quickly reads fuel levels with zero contact\u003cbr\u003e\n-Easy installation with no moving parts - popular 5 bolt flange\u003cbr\u003e\n-Long life sensor and no failing floats\u003cbr\u003e\n-Easy to program the level of any tank and electronic gauge - does not work with OE style gauges that utilize an ohm only input\u003cbr\u003e\n-Bolt Circle Diameter (BCD) is 2.122\"\u003cbr\u003e\n-Output is a PWM signal for 12 Volt applications (10 volts to 20 volts maximum)\u003cbr\u003e\n-Includes mounting hardware and rubber gasket\u003cbr\u003e\n-May not work on Highly Reflective Stainless-Steel Tanks\u003c\/p\u003e","brand":"HOLLEY","offers":[{"title":"Default Title","offer_id":45991803125957,"sku":"HLY19-250-1","price":119.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/19-250-1.webp?v=1774215939"},{"product_id":"msd-crank-trigger-pickup-sensor-hall-effect-8278","title":"MSD Crank Trigger Pickup Sensor - Hall Effect 8278","description":"\u003cp\u003ePN 8278 is the replacement Hall Effect Sensor for flying magnet crank trigger setups using a 3\/4-16\" threaded. This sensor is a Hall Effect sensor, meaning it outputs a square wave signal, which is ideal for use with most Electronic Fuel Injection Systems. This sensor is to only be used with a trigger wheel with \"flying magnets\". It does not detect a ferrous steel target.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n3-Wire Hall Effect sensor that is less susceptible to noise interference\u003cbr\u003e\nSupplied with mating 3-pin connector and pins and seals\u003cbr\u003e\nMost accurate way to trigger your electronic fuel injection (EFI)\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991803158725,"sku":"MSD8278","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8278.webp?v=1774215939"},{"product_id":"msd-ford-351c-460-cam-sync-plug-85211","title":"MSD Ford 351C-460 CAM Sync Plug 85211","description":"\u003cp\u003eMSD's cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition.  The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder.  For wet sump applications, the plug also drives the oil pump.  MSD's cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-CNC billet housing with black anodized cap provide good looks and excellent durability\u003cbr\u003e\n-Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal\u003cbr\u003e\n-Ford Big Block version is supplied with a bronze distributor gear\u003cbr\u003e\n-Built-in L.E.D. makes set-up and indexing quick and easy\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991803224261,"sku":"MSD85211","price":425.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/85211.webp?v=1774215939"},{"product_id":"msd-chevy-sb-bb-cam-sync-plug-85141","title":"MSD Chevy SB\/BB CAM Sync Plug 85141","description":"\u003cp\u003eMSD's cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition.  The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder.  For wet sump applications, the plug also drives the oil pump.  MSD's cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems. The cam sync plug will have 3\/4\" of adjustment.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-3\/4” of adjustment for different deck heights\u003cbr\u003e\n-CNC billet housing with black anodized cap provide good looks and excellent durability\u003cbr\u003e\n-Built-in L.E.D. makes set-up and indexing quick and easy\u003cbr\u003e\n-Chevrolet version is supplied with a equivalent Melonized distributor gear and adjustable slip collar for blocks with a non-standard deck height\u003cbr\u003e\n-Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991803257029,"sku":"MSD85141","price":371.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/85141.webp?v=1774215938"},{"product_id":"msd-chrysler-big-block-426-440-cam-sync-plug-85231","title":"MSD Chrysler Big Block 426, 440 Cam Sync Plug 85231","description":"\u003cp\u003eMSD's cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition.  The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder.  MSD's cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal\u003cbr\u003e\n-CNC billet housing with black anodized cap provide good looks and excellent durability\u003cbr\u003e\n-Built-in L.E.D. makes set-up and indexing quick and easy\u003cbr\u003e\n-Chrysler 426, 440 shaft has a harden and corrosion resistance coating to help resist rust and increase durability\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991803322565,"sku":"MSD85231","price":415.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/85231.webp?v=1774215939"},{"product_id":"msd-chevy-bb-tall-block-cam-sync-plug-85142","title":"MSD Chevy BB Tall Block Cam Sync Plug 85142","description":"\u003cp\u003eMSD's cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition.  The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder.  MSD's cam sync is a plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems. The cam sync plug will have 2-3\/4\" of adjustment.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-O-ring seals can be added to modified blocks to improve oil pressure control\u003cbr\u003e\n-2-3\/4” of adjustment for different deck heights\u003cbr\u003e\n-Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal\u003cbr\u003e\n-Built-in L.E.D. makes set-up and indexing quick and easy\u003cbr\u003e\n-Shaft is guided by a sealed ball bearing and an extra long sintered bushing\u003cbr\u003e\n-Chevrolet version is supplied with a equivalent Melonized distributor gear and adjustable slip collar for blocks with a non-standard deck height\u003cbr\u003e\n-CNC billet housing with black anodized cap provide good looks and excellent durability\u003cbr\u003e\n-Special oil tract improves lubrication to the distributor and cam gear\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991803420869,"sku":"MSD85142","price":467.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/85142.webp?v=1774215939"},{"product_id":"holley-standard-cam-height-small-block-chevy-cam-sync-kit-556-119","title":"Holley Standard Cam Height Small Block Chevy Cam Sync Kit 556-119","description":"\u003cp\u003eSpecifically designed for use w\/ JESEL and similar external, dry timing-belt, cam drive systems. Includes 3 wire hall-effect sensor (8-20 volts), anodized billet aluminum bracket, mounting hardware, mating connector, and stainless steel 1\/4\"-20 \"flying magnet\" screw w\/ high-temp, rare-earth magnet.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Fits Small Block Chevy engines w\/ JESEL and similar external, dry timing-belt, cam drive systems\u003cbr\u003e\n-Includes 3 wire hall-effect sensor (8-20 volts), anodized billet aluminum bracket, mounting hardware, mating connector, and stainless steel ¼”-20 “flying magnet” screw w\/ high-temp, rare-earth magnet\u003cbr\u003e\n-Unique t-nut and bracket design allows for complete sensor adjustment from the outside of the bracket with a single jam nut\u003cbr\u003e\n-Designed to provide a plug-\u0026amp;-play cam position signal to Holley EFI systems, Also compatible with any EFI system which can read a digital, square-wave cam input signal\u003cbr\u003e\n-Bracket assembly can be mounted in up to five locations to accommodate various cam-drive systems and front accessory drive configurations\u003c\/p\u003e","brand":"HOLLEY","offers":[{"title":"Default Title","offer_id":45991803453637,"sku":"HLY556-119","price":371.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/556-119.webp?v=1774215939"},{"product_id":"holley-cam-sync-kit-600-1-0-inch-raised-cam-556-121","title":"Holley Cam Sync Kit, +600\/1.0 inch Raised Cam 556-121","description":"\u003cp\u003eSpecifically designed for use w\/ JESEL and similar external, dry timing-belt, cam drive systems. Includes 3 wire hall-effect sensor (8-20 volts), anodized billet aluminum bracket, mounting hardware, mating connector, and stainless steel 1\/4\"-20 \"flying magnet\" screw w\/ high-temp, rare-earth magnet.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Fits Big Block Chevy engines w\/ JESEL and similar external, dry timing-belt, cam drive systems\u003cbr\u003e\n-Includes 3 wire hall-effect sensor (8-20 volts), anodized billet aluminum bracket, mounting hardware, mating connector, and stainless steel ¼”-20 “flying magnet” screw w\/ high-temp, rare-earth magnet\u003cbr\u003e\n-Unique t-nut and bracket design allows for complete sensor adjustment from the outside of the bracket with a single jam nut\u003cbr\u003e\n-Designed to provide a plug-\u0026amp;-play cam position signal to Holley EFI systems, Also compatible with any EFI system which can read a digital, square-wave cam input signal\u003cbr\u003e\n-Bracket assembly can be mounted in up to five locations to accommodate various cam-drive systems and front accessory drive configurations\u003c\/p\u003e","brand":"HOLLEY","offers":[{"title":"Default Title","offer_id":45991803486405,"sku":"HLY556-121","price":382.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/556-121.webp?v=1774215939"},{"product_id":"holley-cam-sync-kit-w-bracket-556-114","title":"Holley Cam Sync Kit w\/ Bracket 556-114","description":"\u003cp\u003eSpecifically designed for use w\/ JESEL and similar external, dry timing-belt, cam drive systems. Includes 3 wire hall-effect sensor (8-20 volts), anodized billet aluminum bracket, mounting hardware, mating connector, and stainless steel 1\/4\"-20 \"flying magnet\" screw w\/ high-temp, rare-earth magnet.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Fits Big Block Chevy engines w\/ JESEL and similar external, dry timing-belt, cam drive systems\u003cbr\u003e\nI-ncludes 3 wire hall-effect sensor (8-20 volts), anodized billet aluminum bracket, mounting hardware, mating connector, and stainless steel ¼”-20 “flying magnet” screw w\/ high-temp, rare-earth magnet\u003cbr\u003e\n-Unique t-nut and bracket design allows for complete sensor adjustment from the outside of the bracket with a single jam nut\u003cbr\u003e\n-Designed to provide a plug-\u0026amp;-play cam position signal to Holley EFI systems, Also compatible with any EFI system which can read a digital, square-wave cam input signal\u003cbr\u003e\n-Bracket assembly can be mounted in up to five locations to accommodate various cam-drive systems and front accessory drive configurations\u003c\/p\u003e","brand":"HOLLEY","offers":[{"title":"Default Title","offer_id":45991803519173,"sku":"HLY556-114","price":371.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/556-114.webp?v=1774215939"},{"product_id":"holley-400-raised-cam-sync-kit-556-120","title":"Holley +.400\" Raised Cam Sync Kit 556-120","description":"\u003cp\u003eThese kits were specifically designed to provide a \"plug-\u0026amp;-play\" cam position signal to Holley EFI systems, although they may be used with any EFI system which can read a digital, square-wave input cam signal. They are intended for use with Big Block Chevy engines with a +.400\" raised cam height and (Jesel or similar) external, dry timing-belt, cam drive systems.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Fits Big Block Chevy Engines w\/jesel and similar external, dry timing-belt, cam drive systems\u003cbr\u003e\n-Designed to provide a plug-n-play cam position signal to Holley EFI systems\u003cbr\u003e\n-Compatible with any EFI system which can read a digital, square-wave cam input signal\u003cbr\u003e\n-Bracket assembly can be mounted in up to five locations to accommodate various cam-drive systems and front accessory drive configurations\u003cbr\u003e\n-About Holley EFI\u003c\/p\u003e","brand":"HOLLEY","offers":[{"title":"Default Title","offer_id":45991803617477,"sku":"HLY556-120","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/556-120.webp?v=1774215939"},{"product_id":"msd-ford-351w-sync-plug-85061","title":"MSD Ford 351W Sync Plug 85061","description":"\u003cp\u003eMSD's cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition.  The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder.  For wet sump applications, the plug also drives the oil pump.  MSD's cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.\u003cbr\u003e\nFeatures:\u003cbr\u003e\n-Supplied with a steel distributor gear\u003cbr\u003e\n-CNC billet housing with black anodized cap provide good looks and excellent durability\u003cbr\u003e\n-Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal\u003cbr\u003e\n-Built-in L.E.D. makes set-up and indexing quick and easy\u003c\/p\u003e","brand":"MSD IGNITION","offers":[{"title":"Default Title","offer_id":45991803650245,"sku":"MSD85061","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/85061.webp?v=1774215939"},{"product_id":"5-pack-gm-lsx-coolant-temp-sensor","title":"(5 PACK!) GM LSX Coolant Temp Sensor","description":"\u003cp\u003eBULK BUY!\u003cbr\u003e\n \u003cbr\u003e\n (5 PACK!)\u003cbr\u003e\n \u003cbr\u003e\n LSX Coolant Temp Sensor M12X1.5 for 4.8L\/ 5.3L \/6.0L\u003cbr\u003e\n \u003cbr\u003e\n Replacement sensor for all GM 4.8L, 5.3L, 5.7L, 6.0, 6.2L, LS1, LS2, \u003cbr\u003e\n \u003cbr\u003e\n 1:1 replacement for GM coolant temp sensor part numbers: 12551708, 19236568, 213-4514, 213-4333 213-953, 5S147, TS10076, 8153693050, 8154042800, 2134692, 12608814,1338477, 15404280, 8153263880\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all major standalone ecu's such as; Holley, Haltech, Fuel Tech, Big Stuff, etc. \u003cbr\u003e\n \u003cbr\u003e\n Electrical connector kit sold separately.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804272837,"sku":"19236568X5","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/5_pack_GM_LSX_Coolant_Temp_Sensor.webp?v=1774209461"},{"product_id":"0-100-psi-pressure-sensor-pn-7990100","title":"0-100 PSI Pressure Sensor PN: 7990100","description":"\u003cp\u003eDO NOT USE 799 SERIES FOR DOME PRESSURE. USE 8990100\u003cbr\u003e\n \u003cbr\u003e\n 0-100 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; fuel pressure, oil pressure\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804305605,"sku":"7990100","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/7990100.webp?v=1774209461"},{"product_id":"0-15-psi-pressure-sensor-pn-8990015","title":"0-15 PSI Pressure Sensor PN: 8990015","description":"\u003cp\u003e0-15 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; carburetor fuel pressure, and coolant pressure\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804666053,"sku":"8990015","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8990015.webp?v=1774209461"},{"product_id":"0-150-psi-pressure-sensor-pn-7990150","title":"0-150 PSI Pressure Sensor PN: 7990150","description":"\u003cp\u003e0-150 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V. (Same voltage scaling as Holley, Haltech, RPM, Racepak, Fuel Tech etc.)\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; dome pressure, fuel pressure, oil pressure, coolant pressure, back pressure, etc.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804698821,"sku":"7990150","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/79990150.webp?v=1774209461"},{"product_id":"0-1600-psi-nitrous-bottle-pressure-sensor-pn-8991600","title":"0-1600 PSI Nitrous Bottle Pressure Sensor PN: 8991600","description":"\u003cp\u003e0-1600 PSI\u003cbr\u003e\n \u003cbr\u003e\n Great for Nitrous bottle pressure or brake pressure sensor.\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V \u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Works with all major data loggers and EFI systems.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804764357,"sku":"8991600","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8991600.webp?v=1774209461"},{"product_id":"0-25-psi-pressure-sensor-pn-8990025","title":"0-25 PSI Pressure Sensor PN: 8990025","description":"\u003cp\u003e0-25 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; carburetor fuel pressure, and coolant pressure\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804829893,"sku":"8990025","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8990025.webp?v=1774209461"},{"product_id":"0-30-psi-pressure-sensor-pn-8990030","title":"0-30 PSI Pressure Sensor PN: 8990030","description":"\u003cp\u003e0-30 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V. (Same voltage scaling as Holley, Haltech, Fuel-Tech, Racepak, RPM, etc)\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; pan Vac, carburetor fuel pressure, coolant pressure, etc.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804862661,"sku":"8990030","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8990030.webp?v=1774209461"},{"product_id":"0-300-psi-pressure-sensor-pn-7990300","title":"0-300 PSI Pressure Sensor PN: 7990300","description":"\u003cp\u003e0-300 PSI 5V pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; transmission pressure.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804895429,"sku":"7990300","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/7990300.webp?v=1774209461"},{"product_id":"0-3000-psi-pressure-sensor-pn-8993000","title":"0-3000 PSI Pressure Sensor PN: 8993000","description":"\u003cp\u003e0-3000 PSI 5V pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; transmission pressure.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804928197,"sku":"8993000","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8993000.webp?v=1774209460"},{"product_id":"0-50-psi-pressure-sensor-pn-8990050","title":"0-50 PSI Pressure Sensor PN: 8990050","description":"\u003cp\u003e0-50 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V. (Same voltage scaling as Holley, Haltech, Fuel-Tech, Racepak, RPM, etc)\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; carburetor fuel pressure, coolant pressure, etc.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804960965,"sku":"8990050","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8990050.webp?v=1774209460"},{"product_id":"0-5000-psi-pressure-sensor-pn-8995000","title":"0-5000 PSI Pressure Sensor PN: 8995000","description":"\u003cp\u003e0-5000 PSI 5V pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; transmission pressure.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991804993733,"sku":"8995000","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8995000.webp?v=1774209460"},{"product_id":"1-bar-map-pan-vac-pn-899001","title":"1 BAR MAP \/ PAN VAC PN: 899001","description":"\u003cp\u003e1 BAR MAP SENSOR \/ PAN VAC SENSOR\u003cbr\u003e\n \u003cbr\u003e\n 0-30\" HG (-14.5 PSI to 0 PSI) (-1 bar to 0 bar)\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with MOST EFI and data logging systems.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805059269,"sku":"899001","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/899001.webp?v=1774209461"},{"product_id":"1-x-2-travel-sensor-pn-sts23200","title":"1\" X 2\" Travel Sensor PN: STS23200","description":"\u003cp\u003eNeed progressive N2o control? this is perfect for carbureted throttle position sensors.\u003cbr\u003e\n \u003cbr\u003e\n Tired of holding the transbrake button to back up? This position sensor also works great for transmission gear detection. Just wire up your transbrake output to turn on when the shifter is in reverse. \u003cbr\u003e\n \u003cbr\u003e\n 2\" linear travel sensor.\u003cbr\u003e\n \u003cbr\u003e\n Smallest shock travel sensor on the market.\u003cbr\u003e\n Perfect for front suspensions with limited space. \u003cbr\u003e\n 1\" Diameter.\u003cbr\u003e\n 2\" Stroke.\u003cbr\u003e\n Overall length at full compression 7\" Long.\u003cbr\u003e\n Overall length at full extension 9\" Long. \u003cbr\u003e\n Works on stock suspension to Promod.\u003cbr\u003e\n Sensor outputs 0-5V analog signal.\u003cbr\u003e\n Compatible with all major dataloggers. I.e, Racepack, Holley EFI, FuelTech.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805124805,"sku":"STS23200","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/STS23200.webp?v=1774209461"},{"product_id":"1-x-3-travel-sensor-pn-sts23300","title":"1\" X 3\" Travel Sensor PN: STS23300","description":"\u003cp\u003e3\" shock travel sensor\u003cbr\u003e\n \u003cbr\u003e\n 1\" Diameter.\u003cbr\u003e\n This unit Provides 3 times more contact area than the 1\/2\" unit. (Cleanest data possible.) \u003cbr\u003e\n 3\" Stroke.\u003cbr\u003e\n Overall length at full compression 8\" Long. \u003cbr\u003e\n Overall length at full extension 11\" Long .\u003cbr\u003e\n Works on stock suspension to Promod.\u003cbr\u003e\n Sensor outputs 0-5V analog signal.\u003cbr\u003e\n Compatible with all major dataloggers. I.e, Racepack, Holley EFI, FuelTech\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805157573,"sku":"STS23300","price":103.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/STS23300.webp?v=1774209461"},{"product_id":"1-2-x-2-travel-sensor-pn-sts12200","title":"1\/2\" X 2\" Travel Sensor PN: STS12200","description":"\u003cp\u003eTired of holding the transbrake button to back up? This position sensor also works great for transmission gear detection. Just wire up your transbrake output to turn on when the shifter is in reverse. \u003cbr\u003e\n \u003cbr\u003e\n Or\u003cbr\u003e\n \u003cbr\u003e\n Need progressive N2o control? This is perfect for carbureted throttle position sensors.\u003cbr\u003e\n \u003cbr\u003e\n 2\" linear travel sensor.\u003cbr\u003e\n \u003cbr\u003e\n Smallest shock travel sensor on the market.\u003cbr\u003e\n Perfect for front suspensions with limited space. \u003cbr\u003e\n 1\/2\" Diameter.\u003cbr\u003e\n 2\" Stroke.\u003cbr\u003e\n Overall length at full compression 7\" Long.\u003cbr\u003e\n Overall length at full extension 9\" Long. \u003cbr\u003e\n Works on stock suspension to Promod.\u003cbr\u003e\n Sensor outputs 0-5V analog signal.\u003cbr\u003e\n Compatible with all major dataloggers. I.e, Racepack, Holley EFI, FuelTech.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805190341,"sku":"STS12200","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/STS12200.webp?v=1774209461"},{"product_id":"1-2-x-3-travel-sensor-pn-sts12300","title":"1\/2\" X 3\" Travel Sensor PN: STS12300","description":"\u003cp\u003e3\" linear travel sensor.\u003cbr\u003e\n \u003cbr\u003e\n Great for shift linkage position, rack and pinion steering position, and ultra short stroke front suspension. \u003cbr\u003e\n Perfect for front suspensions with limited space. \u003cbr\u003e\n 1\/2\" Diameter.\u003cbr\u003e\n 3\" Stroke.\u003cbr\u003e\n Overall length at full compression 8\" Long.\u003cbr\u003e\n Overall length at full extension 11\" Long. \u003cbr\u003e\n Works on stock suspension to Promod.\u003cbr\u003e\n Sensor outputs 0-5V analog signal.\u003cbr\u003e\n Compatible with all major dataloggers. I.e, Racepack, Holley EFI, FuelTech.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805223109,"sku":"STS12300","price":78.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/STS12300.webp?v=1774209461"},{"product_id":"10-bar-map-sensor-pn-8990010","title":"10 Bar Map Sensor PN: 8990010","description":"\u003cp\u003e10 Bar Map sensor\u003cbr\u003e\n \u003cbr\u003e\n -1 bar to +9 bar map sensor.\u003cbr\u003e\n \u003cbr\u003e\n -14.5 PSI to + 130.5 PSI Absolute pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n -14.5 PSI = 0.5 Volts 130.5 PSI = 4.5 Volts\u003cbr\u003e\n \u003cbr\u003e\n Outputs 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Input 5V\u003cbr\u003e\n \u003cbr\u003e\n Accuracy 0.5% of full scale. \u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Not compatible with FAST XFI or HP tuners.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805255877,"sku":"8990010","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/8990010.webp?v=1774209460"},{"product_id":"150-psi-pressure-temperature-combo-150-psi-500-f-pn-899404","title":"150 PSI Pressure \u0026 Temperature Combo 150 PSI \/ 500*F PN: 899404","description":"\u003cp\u003eCOMPATIBLE WITH HOLLEY, HALTECH, FUELTECH, ETC.\u003cbr\u003e\n \u003cbr\u003e\n PN: 899404\u003cbr\u003e\n \u003cbr\u003e\n  outputs 0.5V to 4.5V signal for PSI. \u003cbr\u003e\n \u003cbr\u003e\n 0 to 150 psi and 0-500*F in one sensor! \u003cbr\u003e\n \u003cbr\u003e\n Same exact size as the standard 100 psi sensor\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT\u003cbr\u003e\n \u003cbr\u003e\n 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever it is convenient.) Highly recommend adding a Deutsch DTM connector. \u003cbr\u003e\n \u003cbr\u003e\n Ultra compact\u003cbr\u003e\n \u003cbr\u003e\n ASIC Chip\u003cbr\u003e\n \u003cbr\u003e\n Diffused silicon oil filled\u003cbr\u003e\n \u003cbr\u003e\n Shock\/vibration resistant\u003cbr\u003e\n \u003cbr\u003e\n Corrosion resistant \u003cbr\u003e\n \u003cbr\u003e\n 0.5% accuracy for full scale.\u003cbr\u003e\n \u003cbr\u003e\n WIRING\u003cbr\u003e\n \u003cbr\u003e\n RED = 5 Volt supply\u003cbr\u003e\n \u003cbr\u003e\n BLACK = Negative Sensor ground\u003cbr\u003e\n \u003cbr\u003e\n YELLOW = Pressure signal \u003cbr\u003e\n \u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n White= Negative sensor ground\u003cbr\u003e\n \u003cbr\u003e\n Green= Signal wire to ECU\u003cbr\u003e\n \u003cbr\u003e\n FUELTECH Voltage Scaling\u003cbr\u003e\n \u003cbr\u003e\n 150 PSI\u003cbr\u003e\n Voltage PSI\u003cbr\u003e\n 0.50 0\u003cbr\u003e\n 0.77 10\u003cbr\u003e\n 1.03 20\u003cbr\u003e\n 1.30 30\u003cbr\u003e\n 1.57 40\u003cbr\u003e\n 1.83 50\u003cbr\u003e\n 2.10 60\u003cbr\u003e\n 2.37 70\u003cbr\u003e\n 2.63 80\u003cbr\u003e\n 2.90 90\u003cbr\u003e\n 3.17 100\u003cbr\u003e\n 3.43 110\u003cbr\u003e\n 3.70 120\u003cbr\u003e\n 3.97 130\u003cbr\u003e\n 4.23 140\u003cbr\u003e\n 4.50 150\u003cbr\u003e\n \u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Temp Sensor\u003cbr\u003e\n Degrees F Ohms. \u003cbr\u003e\n -40 84.27\u003cbr\u003e\n -4 89.54\u003cbr\u003e\n 32 100\u003cbr\u003e\n 68 107.79\u003cbr\u003e\n 104 115.54\u003cbr\u003e\n 140 123.24\u003cbr\u003e\n 176 130.9\u003cbr\u003e\n 212 138.51\u003cbr\u003e\n 248 146.07\u003cbr\u003e\n 284 153.585\u003cbr\u003e\n 320 161.05\u003cbr\u003e\n 356 168.48\u003cbr\u003e\n 392 175.86\u003cbr\u003e\n 428 183.19\u003cbr\u003e\n 464 190.47\u003cbr\u003e\n 500 197.71\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805288645,"sku":"899404","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/899404.webp?v=1774209461"},{"product_id":"2-bar-map-sensor-reads-14-7-psi-to-14-7-psi-pn-899002","title":"2 Bar MAP Sensor (Reads - 14.7 PSI to +14.7 PSI) PN: 899002","description":"\u003cp\u003e2 Bar Map Sensor for Naturally aspirated or N2o assisted combos. \u003cbr\u003e\n \u003cbr\u003e\n Also great for monitoring crankcase pressures with vacuum pumps.\u003cbr\u003e\n \u003cbr\u003e\n Reads crankcase pressure and vacuum from -14.7 to + 14.7 PSI\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; map sensor or crank case pressure sensor with pan vac.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805321413,"sku":"899002","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/899002.webp?v=1774209461"},{"product_id":"200-psi-pressure-sensor-pn-7990200","title":"200 PSI Pressure Sensor PN: 7990200","description":"\u003cp\u003e0-200 PSI 5V pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; transmission pressure.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805386949,"sku":"7990200","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/7990200.webp?v=1774209461"},{"product_id":"3-8-npt-coolant-temp-sensor-pn-25036979","title":"3\/8 NPT Coolant Temp Sensor PN: 25036979","description":"\u003cp\u003e3\/8 NPT Coolant Temp Sensor - GM Delphi \/ Packard Fluid Temperature\u003cbr\u003e\n \u003cbr\u003e\n NOT FOR LSX HEAD\u003cbr\u003e\n \u003cbr\u003e\n 1:1 replacement for GM coolant temp sensors PN: 25036979, 10045847, 12146312, 15321686, 15326386, 1580468, 1580536, 213310, 2134396, 21352, 213928, 25036092, 25036708, 25036979, 25037182, 31022662, 33001793, 5744030, 8100458470, 8121463120, 8133450, 8153263860, 8250360920, 8250369790, J8133450.\u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n Same sensor used with most aftermarket standalone ECUs. \u003cbr\u003e\n \u003cbr\u003e\n *Includes GM Delphi Packard connector, pins, grommets, locking tab.\u003cbr\u003e\n \u003cbr\u003e\n 3\/8 NPT\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805452485,"sku":"25036979","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/25036979.webp?v=1774209461"},{"product_id":"500-psi-pressure-sensor-pn-7990500","title":"500 PSI Pressure Sensor PN: 7990500","description":"\u003cp\u003e0-500 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems. \u003cbr\u003e\n \u003cbr\u003e\n Typical uses; transmission pressure.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805485253,"sku":"7990500","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/7990500.webp?v=1774209461"},{"product_id":"6-bar-map-sensor-pn-899006","title":"6 Bar Map Sensor PN: 899006","description":"\u003cp\u003e6 Bar Map sensor\u003cbr\u003e\n \u003cbr\u003e\n -1 bar to +5 bar map sensor.\u003cbr\u003e\n \u003cbr\u003e\n -14.5 PSI to + 72.5 PSI Absolute pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n -14.5 PSI = 0.5 Volts, 0 PSI = 1.16 Volts, 72.5 PSI = 4.5 Volts\u003cbr\u003e\n \u003cbr\u003e\n Outputs 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Input 5V\u003cbr\u003e\n \u003cbr\u003e\n Accuracy 0.5% of full scale. \u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Not compatible with FAST XFI or HP tuners.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805550789,"sku":"899006","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/899006.webp?v=1774209461"},{"product_id":"7-bar-map-sensor-pn-899007","title":"7 Bar Map Sensor PN: 899007","description":"\u003cp\u003e7 Bar Map sensor\u003cbr\u003e\n \u003cbr\u003e\n -1 bar to +6 bar map sensor.\u003cbr\u003e\n \u003cbr\u003e\n -14.5 PSI to + 87 PSI Absolute pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n -14.5 PSI = 0.5 Volts, 0 PSI = 1.16 Volts, 87 PSI = 4.5 Volts\u003cbr\u003e\n \u003cbr\u003e\n Outputs 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Input 5V\u003cbr\u003e\n \u003cbr\u003e\n Accuracy 0.5% of full scale. \u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT thread\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Not compatible with FAST XFI or HP tuners.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805616325,"sku":"899007","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/899007.webp?v=1774209461"},{"product_id":"7-16a-20-unf-female-100-psi-pressure-sensor-pn-7990100-716","title":"7\/16”-20 UNF Female 100 PSI Pressure Sensor PN: 7990100-716","description":"\u003cp\u003e* Specifically for LS 4.8, 5.3, and 6.0 with stock fuel rails.\u003cbr\u003e\n \u003cbr\u003e\n *7\/16”-20 UNF Female (commonly referred to as -4AN) \u003cbr\u003e\n \u003cbr\u003e\n * Sensor has built in schraeder valve nipple. No need to remove stock schraeder valve.\u003cbr\u003e\n \u003cbr\u003e\n accuracy is 0.5% across the full scale\u003cbr\u003e\n \u003cbr\u003e\n  0-100 PSI pressure sensor\u003cbr\u003e\n \u003cbr\u003e\n 0.5V to 4.5V\u003cbr\u003e\n \u003cbr\u003e\n Heavy duty Stainless steel body\u003cbr\u003e\n \u003cbr\u003e\n Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately)\u003cbr\u003e\n \u003cbr\u003e\n Compatible with all EFI and data logging systems.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805681861,"sku":"7990100-716","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/7990100-716.webp?v=1774209461"},{"product_id":"brake-pressure-temperature-combo-1500-psi-500-f-pn-899405","title":"Brake Pressure \u0026 Temperature Combo 1500 PSI \/ 500*F PN: 899405","description":"\u003cp\u003eCOMPATIBLE WITH HOLLEY, FUELTECH, HALTECH, ETC.\u003cbr\u003e\n \u003cbr\u003e\n LDM899TP combo sensor. \u003cbr\u003e\n \u003cbr\u003e\n Perfect for Brake pressure\/temp. \u003cbr\u003e\n \u003cbr\u003e\n outputs 0.5V to 4.5V signal for PSI. \u003cbr\u003e\n \u003cbr\u003e\n 0 to 1500 psi and 0-500*F in one sensor!\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT\u003cbr\u003e\n \u003cbr\u003e\n 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever it is convenient.)\u003cbr\u003e\n \u003cbr\u003e\n Ultra compact\u003cbr\u003e\n \u003cbr\u003e\n ASIC Chip\u003cbr\u003e\n \u003cbr\u003e\n Diffused silicon oil filled\u003cbr\u003e\n \u003cbr\u003e\n Shock\/vibration resistant\u003cbr\u003e\n \u003cbr\u003e\n Corrosion resistant \u003cbr\u003e\n \u003cbr\u003e\n 0.5% accuracy for full scale.\u003cbr\u003e\n \u003cbr\u003e\n WIRING\u003cbr\u003e\n \u003cbr\u003e\n RED = 5 Volt supply\u003cbr\u003e\n \u003cbr\u003e\n BLACK = Negative Sensor ground\u003cbr\u003e\n \u003cbr\u003e\n YELLOW = Pressure signal \u003cbr\u003e\n \u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n White= Negative sensor ground\u003cbr\u003e\n \u003cbr\u003e\n Green = Signal wire to ECU\u003cbr\u003e\n \u003cbr\u003e\n  FUELTECH Voltage Scaling\u003cbr\u003e\n \u003cbr\u003e\n 1500 PSI \u003cbr\u003e\n PSI Voltage\u003cbr\u003e\n 0 0.5\u003cbr\u003e\n 100 0.77\u003cbr\u003e\n 200 1.03\u003cbr\u003e\n 300 1.3\u003cbr\u003e\n 400 1.57\u003cbr\u003e\n 500 1.83\u003cbr\u003e\n 600 2.1\u003cbr\u003e\n 700 2.37\u003cbr\u003e\n 800 2.63\u003cbr\u003e\n 900 2.9\u003cbr\u003e\n 1000 3.17\u003cbr\u003e\n 1100 3.43\u003cbr\u003e\n 1200 3.7\u003cbr\u003e\n 1300 3.97\u003cbr\u003e\n 1400 4.23\u003cbr\u003e\n 1500 4.5\u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n  Temp Sensor. \u003cbr\u003e\n Degrees F Ohms. \u003cbr\u003e\n -40 84.27\u003cbr\u003e\n -4 89.54\u003cbr\u003e\n 32 100\u003cbr\u003e\n 68 107.79\u003cbr\u003e\n 104 115.54\u003cbr\u003e\n 140 123.24\u003cbr\u003e\n 176 130.9\u003cbr\u003e\n 212 138.51\u003cbr\u003e\n 248 146.07\u003cbr\u003e\n 284 153.585\u003cbr\u003e\n 320 161.05\u003cbr\u003e\n 356 168.48\u003cbr\u003e\n 392 175.86\u003cbr\u003e\n 428 183.19\u003cbr\u003e\n 464 190.47\u003cbr\u003e\n 500 197.71\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805747397,"sku":"899405","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/899405.webp?v=1774209461"},{"product_id":"converter-pressure-temperature-combo-300-psi-500-f-pn-899402","title":"Converter Pressure \u0026 Temperature Combo 300 PSI \/ 500*F PN: 899402","description":"\u003cp\u003eCOMPATIBLE WITH HOLLEY, FUELTECH, HALTECH, ETC.\u003cbr\u003e\n \u003cbr\u003e\n LDM899TP combo sensor. \u003cbr\u003e\n \u003cbr\u003e\n Perfect for converter pressure\/temp. \u003cbr\u003e\n \u003cbr\u003e\n outputs 0.5V to 4.5V signal for PSI. \u003cbr\u003e\n \u003cbr\u003e\n 0 to 300 psi and 0-500*F in one sensor!\u003cbr\u003e\n \u003cbr\u003e\n 1\/8\" NPT\u003cbr\u003e\n \u003cbr\u003e\n 8.5 feet flying lead. (Enough extra wire to cut and add connector where ever it is convenient.)\u003cbr\u003e\n \u003cbr\u003e\n Ultra compact\u003cbr\u003e\n \u003cbr\u003e\n ASIC Chip\u003cbr\u003e\n \u003cbr\u003e\n Diffused silicon oil filled\u003cbr\u003e\n \u003cbr\u003e\n Shock\/vibration resistant\u003cbr\u003e\n \u003cbr\u003e\n Corrosion resistant \u003cbr\u003e\n \u003cbr\u003e\n 0.5% accuracy for full scale.\u003cbr\u003e\n \u003cbr\u003e\n WIRING\u003cbr\u003e\n \u003cbr\u003e\n RED = 5 Volt supply\u003cbr\u003e\n \u003cbr\u003e\n BLACK = Negative Sensor ground\u003cbr\u003e\n \u003cbr\u003e\n YELLOW = Pressure signal \u003cbr\u003e\n \u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n White= Negative sensor ground\u003cbr\u003e\n \u003cbr\u003e\n Green = Signal wire to ECU\u003cbr\u003e\n \u003cbr\u003e\n   FUELTECH Voltage Scaling\u003cbr\u003e\n \u003cbr\u003e\n 300 PSI \u003cbr\u003e\n PSI Voltage\u003cbr\u003e\n 0 0.5\u003cbr\u003e\n 20 0.77\u003cbr\u003e\n 40 1.03\u003cbr\u003e\n 60 1.3\u003cbr\u003e\n 80 1.57\u003cbr\u003e\n 100 1.83\u003cbr\u003e\n 120 2.1\u003cbr\u003e\n 140 2.37\u003cbr\u003e\n 160 2.63\u003cbr\u003e\n 180 2.9\u003cbr\u003e\n 200 3.17\u003cbr\u003e\n 220 3.43\u003cbr\u003e\n 240 3.7\u003cbr\u003e\n 260 3.97\u003cbr\u003e\n 280 4.23\u003cbr\u003e\n 300 4.5\u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n  Temp Sensor. \u003cbr\u003e\n Degrees F Ohms. \u003cbr\u003e\n -40 84.27\u003cbr\u003e\n -4 89.54\u003cbr\u003e\n 32 100\u003cbr\u003e\n 68 107.79\u003cbr\u003e\n 104 115.54\u003cbr\u003e\n 140 123.24\u003cbr\u003e\n 176 130.9\u003cbr\u003e\n 212 138.51\u003cbr\u003e\n 248 146.07\u003cbr\u003e\n 284 153.585\u003cbr\u003e\n 320 161.05\u003cbr\u003e\n 356 168.48\u003cbr\u003e\n 392 175.86\u003cbr\u003e\n 428 183.19\u003cbr\u003e\n 464 190.47\u003cbr\u003e\n 500 197.71\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805845701,"sku":"899402","price":92.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/899402.webp?v=1774209461"},{"product_id":"driveshaft-speed-sensor-ldm-hall-3-8a-24-no-np-pn-1523824","title":"Driveshaft Speed Sensor LDM-HALL-3\/8”-24-NO-NP PN: 1523824","description":"\u003cp\u003eLooking for an affordable replacement driveshaft speed sensor? Tired of setting gaps only to find it still isn’t reading properly? Well, here’s the solution! \u003cbr\u003e\n \u003cbr\u003e\n \u003cbr\u003e\n built in LED indicator light for setup\u003cbr\u003e\n Triggered by ferrous material (Not magnets)\u003cbr\u003e\n 3\/8” 24\u003cbr\u003e\n Stainless steel body\u003cbr\u003e\n Detection range 0.1MM to 1MM\u003cbr\u003e\n Flush mount\u003cbr\u003e\n Supply voltage 10V-30V\u003cbr\u003e\n Short circuited\/reverse protection built in.\u003cbr\u003e\n Working temperature -13F to 176F\u003cbr\u003e\n IP67 rated (water proof)\u003cbr\u003e\n Normally open signal \u003cbr\u003e\n Max switching frequency 8,000HZ \u003cbr\u003e\n  \u003cbr\u003e\n \u003cbr\u003e\n wiring:\u003cbr\u003e\n \u003cbr\u003e\n Brown = power supply (10-30VDC)\u003cbr\u003e\n \u003cbr\u003e\n Blue = Clean ground\u003cbr\u003e\n \u003cbr\u003e\n Black = Signal wire (Outputs 0V) to data logger.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805878469,"sku":"1523824","price":81.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/1523824.webp?v=1774209461"},{"product_id":"driveshaft-speed-sensor-ldm-hall-m12-no-np-pn-1520012","title":"Driveshaft Speed Sensor LDM-HALL-M12-NO-NP PN: 1520012","description":"\u003cp\u003eLooking for an affordable replacement driveshaft speed sensor? Tired of setting gaps only to find it still isn’t reading properly?   Well, here’s the solution!\u003c\/p\u003e \n\n\n\u003cp\u003ebuilt in LED indicator light for setup\u003cbr\u003e\nTriggered by ferrous material (Not magnets)\u003cbr\u003e\nM12 body\u003cbr\u003e\nStainless steel body\u003cbr\u003e\nDetection range 0.1MM to 1MM\u003cbr\u003e\nFlush mount\u003cbr\u003e\nSupply voltage 10V-30V\u003cbr\u003e\nShort circuited\/reverse protection built in.\u003cbr\u003e\nWorking temperature -13F to 176F\u003cbr\u003e\nIP67 rated (water proof)\u003cbr\u003e\nNormally open signal \u003cbr\u003e\nMax switching frequency 8,000HZ\u003c\/p\u003e \u003cbr\u003e\n \n\n\u003cp\u003ewiring:\u003c\/p\u003e\n\n\u003cp\u003eBrown = power supply (10-30VDC)\u003c\/p\u003e\n\n\u003cp\u003eBlue = Clean ground\u003c\/p\u003e\n\n\u003cp\u003eBlack = Signal wire  (Outputs 0V) to data logger.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805911237,"sku":"1520012","price":81.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/1520012.webp?v=1774209461"},{"product_id":"heavy-duty-k-type-thermocouple-cylinder-head-temp-sensor-pn-153326","title":"Heavy Duty K-Type Thermocouple Cylinder Head Temp Sensor PN:153326","description":"\u003cp\u003eHeavy Duty Ring w\/ Metal Strain Relief\u003c\/p\u003e\n\n\u003cp\u003e10mm or 3\/8\"\u003c\/p\u003e\n\n\u003cp\u003eK-Type Mini Plug w\/ Metal Strain Relief\u003c\/p\u003e\n\n\u003cp\u003e36\" Long 24 AWG Cable\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805944005,"sku":"153326","price":87.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/153326.webp?v=1774209461"},{"product_id":"infrared-tire-and-track-temperature-sensor","title":"Infrared Tire and Track Temperature Sensor","description":"\u003cp\u003eUsed to record track surface temp and tire temperature.\u003c\/p\u003e \n\n\u003cp\u003eAlso can be used for brake temperature sensors\u003c\/p\u003e\n\n\u003cp\u003eM18 Infrared Temperature Sensor\u003c\/p\u003e\n\n\u003cp\u003eProduct size (Diameter):M18*1mm\u003cbr\u003e\nOutput signal:0-5V\u003cbr\u003e\nSensor Length : 68mm\u003cbr\u003e\nMeasuring temperature: 32-392F (0-200C) or 32-572F (0-300C)\u003cbr\u003e\nSupply voltage:DC12V\u003cbr\u003e\nResponse time: 240ms\u003cbr\u003e\nAccuracy : ±1% or ±1℃\u003cbr\u003e\nDetect distance:2 feet (MAX: Within 1000mm)\u003cbr\u003e\nConnection: 2 meter cable leads\u003cbr\u003e\nIncludes bracket\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991805976773,"sku":"153300","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/Infrared_Tire_and_Track_Temperature_Sensor.webp?v=1774209461"},{"product_id":"intake-air-temp-sensor-pn-25036751","title":"Intake Air Temp Sensor PN: 25036751","description":"\u003cp\u003eMAT \/ IAT sensor\u003c\/p\u003e \n\n\u003cp\u003ePlug and play for Holley EFI MAT\u003c\/p\u003e\n\n\u003cp\u003eGM IAT sensor calibration data resistance chart https:\/\/pe-ltd.com\/assets\/air_temp.pdf\u003c\/p\u003e\n\n\u003cp\u003eReplacement sensor for GM Intake Air Temp Sensor Part Number 25036751 - 25037225 - 25037034\u003c\/p\u003e\n\n\u003cp\u003eTypical Voltage Supply: 5V DC\u003cbr\u003e\nOperating Temperature: -40 C to 135 C\u003cbr\u003e\nSensor Body Material: Brass\u003cbr\u003e\nHex Size: 18.90 mm (3\/4'')\u003cbr\u003e\nThread Size: 3\/8'' -18 NPT\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991806009541,"sku":"25036751NC","price":15.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/25036751.webp?v=1774209461"},{"product_id":"k-type-thermocouple-intake-air-temp-sensor-pn-153325","title":"K-Type Thermocouple Intake Air Temp Sensor PN:153325","description":"\u003cp\u003eK-Type Thermocouple For Intake Air Temp\u003c\/p\u003e\n\n\u003cp\u003eIdeal for extreme temperature applications\u003c\/p\u003e\n\n\u003cp\u003e1\/8\" Inconel Probe w\/ exposed tip, very fast responding\u003c\/p\u003e\n\n\u003cp\u003e36\" Long 24 AWG Cable\u003c\/p\u003e\n\n\u003cp\u003eFitting Sold Separately\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991806042309,"sku":"153325","price":99.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/153325.webp?v=1774209461"},{"product_id":"ldm-hall-5-16-no-np-speed-sensor-pn-1520156","title":"LDM-HALL-5\/16-NO-NP Speed Sensor PN: 1520156","description":"\u003cp\u003e5\/16\"-24 hall effect speed sensor.\u003c\/p\u003e\u003cbr\u003e\n \n\n\u003cp\u003eTriggered by ferrous material (Not magnets)\u003cbr\u003e\n5\/16\"x24 body\u003cbr\u003e\nBuilt in LED light for easy setup\u003cbr\u003e\nStainless steel body\u003cbr\u003e\nDetection range 0.1MM to 1MM (0.004\" to 0.04\")\u003cbr\u003e\nFlush mount\u003cbr\u003e\nSupply voltage 10V-30V\u003cbr\u003e\nShort circuited\/reverse protection built in.\u003cbr\u003e\nWorking temperature -13F to 176F\u003cbr\u003e\nIP67 rated (water proof)\u003cbr\u003e\nNormally open signal \u003cbr\u003e\nMax switching frequency 8,000HZ\u003c\/p\u003e \u003cbr\u003e\n \n\n\u003cp\u003ewiring:\u003c\/p\u003e\n\n\u003cp\u003eBrown = power supply (10-30VDC)\u003c\/p\u003e\n\n\u003cp\u003eBlue = Clean ground\u003c\/p\u003e\n\n\u003cp\u003eBlack = Signal wire  (Outputs 0V) to data logger.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991806107845,"sku":"1520156","price":91.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/1520156.webp?v=1774209461"},{"product_id":"ldm-mag-hall-5-16-no-np-speed-sensor-pn-1525160","title":"LDM-MAG-HALL-5\/16-NO-NP Speed Sensor PN: 1525160","description":"\u003cp\u003e5\/16\"-24 hall effect speed sensor.\u003c\/p\u003e\u003cbr\u003e\n \n\n\u003cp\u003eTriggered by magnets (Not ferrous material)\u003cbr\u003e\n5\/16\"x24 body\u003cbr\u003e\nBuilt in LED light for easy setup\u003cbr\u003e\nNickel plated\u003cbr\u003e\nDetection range 0.1MM to 10MM\u003cbr\u003e\nFlush mount\u003cbr\u003e\nSupply voltage 10V-30V\u003cbr\u003e\nShort circuited\/reverse protection built in.\u003cbr\u003e\nWorking temperature -13F to 176F\u003cbr\u003e\nIP67 rated (water proof)\u003cbr\u003e\nNormally open signal \u003cbr\u003e\nMax switching frequency 1000HZ\u003c\/p\u003e \u003cbr\u003e\n \n\n\u003cp\u003ewiring:\u003c\/p\u003e\n\n\u003cp\u003eBrown = power supply (10-30VDC)\u003c\/p\u003e\n\n\u003cp\u003eBlue = Clean ground\u003c\/p\u003e\n\n\u003cp\u003eBlack = Signal wire  (Outputs 0V) to data logger.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991806173381,"sku":"1525160","price":81.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/1525160.webp?v=1774209461"},{"product_id":"ldm-mag-hall-m8-no-np-speed-sensor-pn-1520008","title":"LDM-MAG-HALL-M8-NO-NP Speed Sensor PN: 1520008","description":"\u003cp\u003eM8-1.0 Hall Effect Speed Sensor.\u003c\/p\u003e\u003cbr\u003e\n \n\n\u003cp\u003eTriggered by magnets (Not ferrous material)\u003cbr\u003e\nM8x1.0 body\u003cbr\u003e\nBuilt in LED light for easy setup\u003cbr\u003e\nNickel plated\u003cbr\u003e\nDetection range 0.1MM to 10MM\u003cbr\u003e\nFlush mount\u003cbr\u003e\nSupply voltage 10V-30V\u003cbr\u003e\nShort circuited\/reverse protection built in.\u003cbr\u003e\nWorking temperature -13F to 176F\u003cbr\u003e\nIP67 rated (water proof)\u003cbr\u003e\nNormally open signal \u003cbr\u003e\nMax switching frequency 1000HZ\u003c\/p\u003e \u003cbr\u003e\n \n\n\u003cp\u003ewiring:\u003c\/p\u003e\n\n\u003cp\u003eBrown = power supply (10-30VDC)\u003c\/p\u003e\n\n\u003cp\u003eBlue = Clean ground\u003c\/p\u003e\n\n\u003cp\u003eBlack = Signal wire  (Outputs 0V) to data logger.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991806206149,"sku":"1520008","price":81.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/1520008.webp?v=1774209461"},{"product_id":"lsx-coolant-temp-sensor-pn-19236568","title":"LSX Coolant Temp Sensor PN: 19236568","description":"\u003cp\u003eLSX Coolant Temp Sensor M12X1.5 for 4.8L\/ 5.3L \/6.0L\u003c\/p\u003e\n\n\u003cp\u003eReplacement sensor for all GM 4.8L, 5.3L, 5.7L, 6.0, 6.2L, LS1, LS2,\u003c\/p\u003e \n\n\u003cp\u003e1:1 replacement for GM coolant temp sensor part numbers: 19236568, 213-4514, 213-4333  213-953, 5S147, TS10076, 8153693050, 8154042800, 2134692, 12608814,1338477, 15404280, 8153263880\u003c\/p\u003e\n\n\u003cp\u003eCompatible with all major standalone ecu's such as; Holley, Haltech, Fuel Tech, Big Stuff, etc.\u003c\/p\u003e \n\n\u003cp\u003eElectrical connector kit included.\u003c\/p\u003e","brand":"LOWDOLLER MOTORSPORTS","offers":[{"title":"Default Title","offer_id":45991806238917,"sku":"19236568","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/files\/19236568.webp?v=1774209461"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1581\/8181\/collections\/7990100.webp?v=1774373484","url":"https:\/\/511innovations.com\/collections\/sensors.oembed","provider":"511 Innovations","version":"1.0","type":"link"}